HCG Diet Revealed... Reveal Your True Body Within!

HCG Mixing Instructions


I Recommend that you purchase 10,000 IUs for a 40 day cycle. However instead of buying the HCG in one large 10,000 IU vial, we recommend that you order it in the quantity of two (2) 5,000 IU vials in larger vials like the ones pictured below or purchase five 2,000 IU vials. We also recommend you take 250 IUs per day for the HCG dosage over a 40 day cycle. To mix the 5,000 IUs of HCG that come in the "large" vials, simply remove 5ml of bacteriostatic water with a syringe from that vial, and inject it into the vial with the 5,000 IU worth of HCG powder. When the syringe is removed, tip the vial on its side and gently roll it back and forth in your palms for a few seconds to mix it. DO NOT SHAKE THE HCG TO MIX IT!

 

10,000 IU "large" vial combo

The larger vials pictured above are targeted for people taking HCG in smaller daily amounts of HCG over longer time periods, like those of us on the HCG protocol. While the "tiny" vials below are geared more towards people taking a larger weekly HCG dosage, like those who take steroids for example. There is absolutely no difference between one type of HCG and the other because the HCG powder is still "purified injectable grade" HCG. The only difference is the vial sizes and the amount of bacteriostatic water that arrives with the packaging. Those are the only 2 differences.

HCG PREGNYL

"Tiny" 1-2ml vial combo

If the HCG arrives in a tiny 1-2ml vial combo like pictured in the photo above, then you will need to dilute it in the tiny vial in order to move it to a larger mixing vial. You may use the smaller vial of bacteriostatic water (AKA solvent with some brands) during this mixing time, save it for another time, or discard it since you will need to purchase the larger vial of bacteriostatic water in order to complete the mixing process anyway.

 In order to dilute the HCG, inject about 1-2ml of bacteriostatic water into the tiny vial in order to liquidize it. Then you can move it into a larger vial with a syringe. Inject the 1-2ml into the tiny vial with the syringe without touching the sides of the vial to keep it sterile. If you do contact the side of the vial, either wipe it with an alcohol wipe or get a new syringe before drawing the remaining bacteriostatic water out of the vial.

While the HCG is soaking into the bacteriostatic water, draw out the remaining 3-4ml and add it to the 5ml+ mixing vial as well. Now that it has been at least a minute or two, use the syringe to draw out the small amount of mixed HCG

All of the other sizes of ordering HCG mix the same way, but the numbers will change. Just remember that all of the mixing ratios are based on 1ml of bacteriostatic water for every 1,000 IU of HCG. Some common sizes for example are listed at the bottom of this page.



Glossary and Terms

Ampule: The size listed is the IU amount of HCG.

Solvent: The amount of solvent in cc's you will need for injections. The solvent you use can be either bacteriostatic water or sterile water. I have heard of people using distilled water, but I do not recommend it.

Dosage: The amount of HCG mixture in cc's that you will give yourself per injection, whether intramuscular or subcutaneous.

Injection yield: the amount of injection days you'll get if you use these proportions.


Conversions

1cc = 1ml (some manufactures supply in cc’s and some in ml’s)

IU = International Unit

1cc = 100 IUs

cc = cubic centimeters

ml = milliliter


HCG Life Expectancy

A 5,000 IU mixture at 200 IU HCG injections per day will last for 25 days and a 2,000 IU vial at 200 IU HCG injections would last for 10 days. Mathematically a 10,000 IU vial would last for 50 days at 200 IUs, however freshness is a concern as HCG typically only lasts about 30 days after it is mixed. The 10,000 IU vials are great for couples who are doing the HCG protocol together.


 Common Sizes

5,000 IUs-Mix the 5,000 IUs of HCG with 5ml of bacteriostatic water the same way the rest of the directions state for 5,000 IUs above. Just substitute the numbers in the directions, and replace 5ml with 2ml and 5,000 IUs with 2,000 IUs, etc.

2,000 IUs - Mix the 2,000 IUs of HCG with the 2ml of bacteriostatic water the same way the rest of the directions state for 5,000 IUs above. Just substitute the numbers in the directions, and replace 5ml with 2ml and 5,000 IUs with 2,000 IUs, etc.

10,000 IUs - Mix 10,000 IUs with 10ml of bacteriostatic water/solvent...

Again, it is all the same as the ones above, but substitute the numbers; 5ml with 10ml, 5,000 IUs with 10,000 IUs, etc.